Audio Technica AT4050

Meet the studio condenser that captures every nuance. With three switchable polar patterns, the large-diaphragm Audio-Technica AT4050SM exhibits a remarkable combination of qualities: high-SPL capability with transparent and airy uppers/mids complemented by rich low-end qualities. Its dual large diaphragms are gold-vaporized and aged for consistent, outstanding performance. A precision-machined, nickel-plated brass acoustic element baffle provides rock-solid element stability and exceptional sensitivity. Supplied with AT8449 shockmount. Also available as the AT4050SC with the AT8430 isolation stand clamp

Ideal for studio use and live sound productions with vocals, piano, strings, drum overheads, guitar amps, and more
Audio-Technica’s AT4050SM. For performance that legends are made of
Transparent uppers/mids balanced by rich low-end qualities combine with advanced acoustic engineering for extensive performance capabilities and highest quality
Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics achieved remain constant over years of use
Three switchable polar patterns: omni, cardioid, figure-of-eight
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
Switchable 80 Hz hi-pass filter and 10 dB pad
Custom shock mount provides superior isolation
Also available as the AT4050SC with the AT8430 isolation stand clamp

SPECIFICATIONS

ELEMENT Externally-polarized (DC bias) condenser
——————————————————————————–
POLAR PATTERNS Cardioid, Omnidirectional, Figure-of-eight
——————————————————————————–
FREQUENCY RESPONSE 20-18,000 Hz
——————————————————————————–
LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
——————————————————————————–
OPEN CIRCUIT SENSITIVITY -36 dB (15.8 mV), re 1V at 1 Pa
——————————————————————————–
IMPEDANCE 100 ohms
——————————————————————————–
MAXIMUM INPUT SOUND LEVEL 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal)
——————————————————————————–
DYNAMIC RANGE (typical) 132 dB, 1 kHz at Max SPL
——————————————————————————–
SIGNAL-TO-NOISE RATIO 77 dB, 1 kHz at 1 Pa
——————————————————————————–
PHANTOM POWER REQUIREMENTS 48V DC, 4.2 mA typical
——————————————————————————–
SWITCHES Polar selection; Flat, roll-off; 10 dB pad (nominal)
——————————————————————————–
WEIGHT 510 g
——————————————————————————–
DIMENSIONS  (188.0 mm) long, (53.4 mm) maximum body diameter
——————————————————————————–
OUTPUT CONNECTORS Integral 3-pin XLRM-type