Audio Technica AT8015

Designed for video production and broadcast (ENG/EFP) audio acquisition, the AT815b provides the narrow acceptance angle desirable for long-distance sound pickup, along with excellent sound rejection from the sides and rear of mic. The roll-off position reduces the pickup of low-frequency ambient noise (such as traffic, air-handling systems, etc.), room reverberation and mechanically coupled vibrationsDesigned for professional recording, broadcasting and film/TV/video production
Provides the narrow acceptance angle desirable for long-distance sound pickup
Excellent sound rejection from the sides and rear of mic
Switchable low-frequency roll-off
Operates on battery or phantom power

ELEMENT Fixed-charge back plate, permanently polarized condenser
——————————————————————————–
POLAR PATTERN Line + gradient
——————————————————————————–
FREQUENCY RESPONSE 30-20,000 Hz
——————————————————————————–
LOW FREQUENCY ROLL-OFF 180 Hz, 12 dB/octave
——————————————————————————–
OPEN CIRCUIT SENSITIVITY Phantom: -38 dB (12.5 mV) re 1V at 1 Pa
Battery: -39 dB (11.2 mV) re 1V at 1 Pa
——————————————————————————–
IMPEDANCE Phantom: 500 ohms
Battery: 600 ohms
——————————————————————————–
MAXIMUM INPUT SOUND LEVEL Phantom: 130 dB SPL, 1 kHz at 1% T.H.D
Battery: 115 dB SPL, 1 kHz at 1% T.H.D
——————————————————————————–
DYNAMIC RANGE (typical) Phantom: 106 dB, 1 kHz at Max SPL
Battery: 91 dB, 1 kHz at Max SPL
——————————————————————————–
SIGNAL-TO-NOISE RATIO 70 dB, 1 kHz at 1 Pa
——————————————————————————–
PHANTOM POWER REQUIREMENTS 9-52V DC, 2 mA typical
——————————————————————————–
BATTERY TYPE 1.5V AA/UM3
——————————————————————————–
BATTERY CURRENT / LIFE 0.4 mA / 1200 hours typical
——————————————————————————–
SWITCH Flat, roll-off -recessed
——————————————————————————–
WEIGHT 200 g
——————————————————————————–
DIMENSIONS  (460.0 mm) long (21.0 mm) diameter
——————————————————————————–
OUTPUT CONNECTOR Integral 3-pin XLRM-type
——————————————————————————–